Description：
Release Time：2025-12-03
Page views：49
Crushing hard rocks in mines and quarries is a challenge for jaw crushers and vertical gyratory crushers at the time of open-air or underground application. For decades, both jaw crushers and vertical gyratory crushers have proven their capabilities. However, the shortcoming is that the high installation height means they require a large number of expensive structures and chambers. Shandong Yonglin Machinery Technology Co., Ltd. provides a breakthrough solution for the coarse crushing of hard rock and ore by its new type of horizontal gyratory crusher. The horizontal gyratory crusher is of compact and sturdy structure, thus it is highly suitable for underground and surface operations. In comparison with traditional primary crushers, its innovative design of integrated pre-screening provides higher efficiency and processing capacity.
| Model | Weight [t] | Power [kW] | Roller diameter [mm] | Roller length [mm] | Feeding opening [mm] | Rod length [mm] | Ore discharge outlet CSS [mm] |
|---|---|---|---|---|---|---|---|
| WSXH18-14 | 83 | 160 - 300 | 1,800 | 1,400 | 1,000 | 1,100 | 100 - 220 |
| WSXH22-20 | 138 | 300 - 450 | 2,200 | 2,000 | 1,200 | 1,250 | 120 - 260 |
| WSXH25-25 | 185 | 450 - 600 | 2,500 | 2,500 | 1,280 | 1,400 | 120 - 260 |
| WSXH25-30 | 215 | 500 - 700 | 2,500 | 3,000 | 1,280 | 1,800 | 140 - 300 |
| WSXH25-34 | 240 | 600 - 800 | 2,500 | 3,400 | 1,280 | 2,100 | 140 - 300 |
1) The weight does not include the base frame, drive motor and tools. The weight may be adjusted in line with the actual equipment configuration.
2) The motor power range applies to the altitude<1000m. The actual motor power depends on the characteristics of the crushed materials, the expected product particle size, the actual equipment configuration and the altitude.
3) Maximum vertical height between the lining board and the jaw plate lining board. The maximum feeding particle size in both directions of the feeding opening must be at least 80% of the feeding opening.
4) Standard rod length. The actual rod length will change in light of the specific equipment configuration.
5) Adjustment range of the ore discharge outlet CSS.CSS= close side setting. The narrowest dimension between the root of the roller lining board tooth root and the jaw plate lining board is measured at the bottom of the crushing cavity.
